Display your “one-of-a-kind” knives proudly and at your fingertips with this handcrafted live edge walnut magnetic knife holder. Comes with pre-drilled slotted keyholes on the back 16″ apart for ease of mounting.
- Shipping Info
Our live edge walnut magnetic knife holder is a must have for any kitchen. These beautiful pieces are hand selected from our live edge inventory to compliment the design and make them a focal point for you to display your best knives. Made from 1 1/4″ rough sawn live edge walnut, these boards are milled on the backside for (24) 20lb hold neodymium magnets. The back is also milled with two keyhole slots measuring 16 inches on center for ease of mounting to studs. The 20″ Long board will hold up to 6 knives. Finished with food safe beeswax and mineral oil, maintenance is a breeze. The width ranges from 5″-“6 depending on the live edge. As this is a natural item color and grain patterns will differ from piece to piece.
Our walnut is sustainably source and milled in South Carolina. It is kiln dried in a vacuum kiln to kill bacteria and fungus and to prevent warping or cupping when placed in your home. This live edge walnut magnetic knife holder fits our style and hopefully yours perfectly. Our products are “rustic refined” and bring a bit of the beauty of the outside world into your home. Please contact us with any questions concerning this product as we are happy to assist. We strive for 100% customer satisfaction and we are committed to customer service. Each product contains our maker’s mark and that means a lot to us.
To keep the board looking and performing well we recommend re-oiling with food grade enriched mineral oil about once every 1-2 months depending on use (do not put dirty knives back on the board) BOARD IS NOT DISHWASHER SAFE. You simply wipe down with a wet soapy cloth, pat dry then allow to air dry completely (about 20 minutes), then apply and food safe mineral oil enriched with beeswax or paraffin. We recommend Walrus Oil (mineral oil, coconut oil, beeswax and vitamin E).
There are two keyhole slots on the back of the board measuring 16″ on center apart. This is the standard width for the wooden studs in your wall. You with need two 1 1/4″ to 1 1/2″ screws (drywall screws work well) if you are screwing into wooden studs. If you don’t have studs to screw into large threaded anchors work very well. Installation is quick and easy. Be sure to mark your wall for the screws at 16″ apart and also check with a 2 foot level to ensure your marks are level prior to installing the screws. This will ensure the base of your knife board will be level as well.
We are a father and son team that began our business during COVID. I (Lou Ciamillo (dad)), am an emergency physician. I’ve been woodworking for over 20 years. When things were hectic during COVID, I was stressed and my son (also Lou), was relegated to remote learning for college. He found himself with time on his hands and was in the workshop whenever I returned from the hospital. He began training to be a carpenter shortly thereafter. We’ve compiled hundreds of customers and an ever expanding product line. Please be sure to check back with us soon for additional new products.
|Dimensions||20 × 6 × 1 in|